Showing posts with label 53. Show all posts
Showing posts with label 53. Show all posts

Tuesday, May 25, 2004

On the Hard in Airlie Beach

I was hanging out at the Great Barrier Reef town of Airlie Beach. Airlie hosts some of Australia’s vacationing wealthy, but with the town’s close proximity to the Whitsunday Islands, it also caters to backpackers from around the world. An additional draw on Airlie’s roster this year was the upcoming Latitudes & Attitudes Cruiser’s Bash (the Plunda down Unda).
Sailing from day to day in warm aft breezes, from one perfect island anchorage to the next; enjoying reef snorkels, sundowners and shooting stars, can be a little tiring. I decided to take a break from it all to haul the boat during my stay in Airlie. Now, normally haul outs suck, but in this case I did not have much to complain about. My new best friend, Phil, and his family, had offered to put me up in their home while I had Low Key out of the water. This was a windfall for me. Being in a yard is hard enough with long hours working in a toxic environment, but having to put away your tools each evening to clear a space in the dust to dine and sleep makes things, well, lame. Having a clean shower, then a coldy or two on the veranda followed by a nice meal with the family and an evening in front of the telie was great.
I had made the treacherous passage up the creek at high tide the night before and gotten safely into the slings of the Travelift. At the crack of 1000 we made it down to the boatyard to find Low Key sitting in her hardstand and ready to be cleaned up. Phil (phree labor) went right to work with the high pressure washer to clean off what growth there was. I met with a couple of shipwrights, an American and an Australian, about my rudder issues. When the boat would surf, the rudder would shimmy back and forth. It was more funny than disconcerting but still, it was something that I wanted to fix. It was loose at the bottom where it connected to the skeg and it was also loose where the stainless post ran up through the fiberglass shaft in the boat. There were no bearings and so, after 32 years, the stainless had worn back some of the fiberglass allowing some play. The shipwrights had all kinds of plans for me, some I did not agree with. Still, I could not do all of the work myself and “time was money” and all of that, so I let them take the rudder to repair the base. How much trouble could they get into?
We went to work on the waterline. It needed to be painted, but there were a couple of blisters. I told Phil that I was going to wait until Venezuela, where the slave labor is cheap, to have them fixed. It was a good plan but one that I could not stick to. Phil had brought down a bunch of his tools and lying right there was a new, in the box, grinder. I could not help myself. I bolted on one of my sanding disks, suited up and went to work. By the time I was done I had made a pretty big mess. It was good to get in and do it right. My assistant learned how to phil the gaps while I gave the bottom paint a quick going over with the sander. I nearly lost my helper when Frank, the kewl chandlery guy and boatyard guru, walked by and joked that Woody needed a little practice with the putty knife. Phil had done a pretty good job, I really could not complain. I felt I was getting my money’s worth.
After a couple of days my rudder returned. The guys had ground back the glass, welded in a piece of steel and filled it back up. Somehow it came to over $400 (including a consultation fee!). It was almost as much as the haul out and a week in the yard. I could have paid a welder $65 and done the rest myself. I sucked it up, smiled and paid them.
My spendy shipwrongs had recommended a couple of things to tighten up the rudder in the shaft, none of which would have withstood the thrashing of another ocean crossing. I decided to fix it with a process that we used on the smaller racing boats back home. You wax the rudder post and put it back into the boat. Then you drill holes in the shaft and inject an epoxy/406/graphite mixture into it. In the back of my mind was the ominous concern that the epoxy would adhere to the rudder post and I would have to cut off the back of the boat to get the rudder out. I dug out the West System manual which had a section on the rudder project which put me slightly more at ease. I drilled the holes and filled the shaft and went “home.”
The next morning we came down and used one of the steel supports lying in the yard to break loose the rudder post from the shaft. It came free but was really tight. One piece of advice for those attempting this upgrade and for that matter, any project: follow the instructions. I did not use as much graphite in the 406/graphite mix as the book had stated (the chandlery was closed!). Also, it had been a cold night and the epoxy had not fully cured before I broke it loose. It was tight enough that I could not get the rudder out of the boat. The next day the epoxy had further cured and the rudder came out and I spent a couple of hours with sandpaper wrapped around some exhaust hose sanding back some of my new black epoxy.
Eventually... it came out better than new!
In Trouble with the Law...
Customs had finally tracked me down. They came by the yard to interrogate me. I was supposed to check in at each stop with Customs. To save myself some time, I had been calling their 1-800 number and reporting in, instead of trying to find and visit each Customs office. The guy seemed a little edgy. He explained that I should be going into each office when I arrive somewhere. Stupid, but OK. But that was not why he drove 50k from Mackay to find me. He explained how I had violated my visa requirements by cruising on an invalid cruising permit. Not me, I thought, I’m reeeal careful with paperwork. He was sure though, and proceeded to explain how much trouble I was in. I showed him my cruising permit. “Someone had messed up in Sydney,” he explained and then he almost apologized. In the end, he gave me some good tips about cruising north and for dealing with Customs.
Right after Customs left, a cute young reporter named Julia came by to interview me. She was from one of the newspapers that Phil had enlisted to help promote the Lats Cruiser’s Bash. I don’t think she was very impressed with the boat. It was not Low Key’s fault. Boats never look good when you first haul them. She got her story and pictures and before I could offer her a frosty beverage, she rushed off to cover a plane crash. First time I’d heard that one.
Bill and David Edge, a father and son team, own Edge’s Boatyard in Airlie Beach, Queensland. Great guys, nice yard, good price, blah blah blah. If you have ever hauled your boat, then you probably know what a Travelift is. For those who do not, it is a massive, three story, blue, steel framework on wheels, that picks up boats and drives them around. These guys were having trouble getting one for their yard, so Dave just built his own - a 40-ton version. Now how kewl is that?
Did Someone Say... Party?
Phil is a big fan of Lats & Atts. He was the one that had organized Australia’s first Latitudes & Attitudes Cruiser’s Bash. By the time all was said and done Phil had secured: use of the Whitsunday Sailing Club, a special cruiser priced buffet, a cruisey entertainer, as well as phree promotion on the local radio stations and newspapers. He and his family handed out hundreds of flyers at the local boating retailers and the boatshow. He had tried to plan it around Bob’s schedule - ya right. It was not until about a week before the event that Bob found the time that allowed him and Jody to make it. This was great news!
On the morning that Bob and Jody were coming in, I arrived at the yard to find Pandaemonium next to me in a stand. My friend Dave, and his lovely Danish cruising partner Phillipa (whom the cruisers had renamed Flippa, since our last encounter), had arrived on the night tide, just in time for the party of course. I had intended to meet Bob and Jody at the airport, but boatyard duties called. Phil brought them by the yard to say hello. It was great to see them, they are like family to me and it had been over a year since I had seen them back in CA. They met Dave and Flippa and that evening we all met back at Phil and Sue’s for a great night of catching up and other lively cruising conversation.
Late that night, Dena, my recently former cruising companion, swept through town. When she left Low Key a month before, she had joined another boat that headed north and explored all of the islands and beautiful reef anchorages up to the city of Cairns (say Cans). She decided that she did not like that boat so much (having been completely spoiled on Low Key) and so she came back down to Airlie to see if I might give her a lift to Darwin. In Darwin she could hop on one of the regatta boats headed for Indo. Her timing was pretty good. When finally leaving Airlie, Low Key would have to make tracks and skip most of the kewl stuff that she had gotten to see while on the other boat. She missed helping with the guest and a week in the yard. And last but not least, she arrived on the morning of the big party. Coincidence? Maybe. Wily, I say. Still, it was great to see her.
She would, over the next couple of days, remind me of the valuable services she could provide for our trip to Darwin. You know, provisioning and cooking and stuff. My notices around town had supplied some promising leads for crew. I was leaning towards the three German girls. I chose Dena in the end. I thought it would be nice for her, nice for me, and hopefully we would make it without killing each other.
Was it Saturday already? It was the big day of the Party. Dave, Flippa, Dena and I went down to the Boatshow at the marina early that evening to party on a big 100-year-old schooner. We grabbed a couple revelers from there and headed up to the Lats’ party. It was early and it was already ragin’. We added our pitchers to the pitchers on Phil’s table and the four of us started in with the tattooing. Lats makes temporary tattoos, one with a nice nautical design and the other with our mascot, Atty. Flippa and Dena did the guys and Dave and I got on the women. Later that night, we had a loudest Hawaiian shirt contest. My favorite was Phil’s friend, Tich, who had a matching Hawaiian shirt and tie combo. We finally chose the guy with a bright shirt and blinding, non-matching shorts. Tasty food, good music and great company; what more could you ever want?
Next month: enduring struggle for freedom from the yard and Low Key heads back out to explore the Great Barrier Reef en route to Australia’s top end.